Creating a .WXS File for use in IFTDSS

In IFTDSS you have the option of conditioning initial fuel moistures by uploading your own weather stream (.wxs) file. If you do not have a .wxs file and need to create one, this tutorial walks through the creation of a .wxs file for use in IFTDSS. First you will download historical hourly weather data (FW13 file), then use FireFamilyPlus to create the .wxs.

Important! If an .wxs file is imported into IFTDSS it must meet the following requirements to run successfully:

  • Data must be hourly format (each row representing one hour).
  • Data must be in chronological order.
  • Data may only have gaps of 3 hours or less.
  • A day is defined as a 24 hour period, it doesn’t need to be midnight to midnight.
  • User can’t upload less than 1 day of data.
  • User can only upload 31 days of data.
  • User can condition for 1 - 7 days.

Downloading hourly weather data

To download historic hourly weather data, use one of the sources below and follow the steps to download your data:

WFAS

URL: https://www.wfas.net/nfdrs2016/maps/

  1. From the map, zoom into your Area of Interest and find the location of your station.
  2. Click the point to show the station.
  3. Save the file to your local machine without opening it by right clicking the station link, select "Save link as" and save the data to your local machine.

    web page image indicating the steps described here in text.

CEFA

URL: https://cefa.dri.edu/raws/

  1. Enter the Station ID and click Get FW13. If needed, use the RAWS list option to look up the station ID number.
  2. Right click the download link. Save the file to your local machine without opening it by clicking “Save link as” to save the file. Give the file a name, and click “OK”.

    webpage displaying steps as described here in text.

Create a .wxs file in Fire Family Plus

The follow steps walk through the creation of a .wxs file using the FW13 data you have downloaded, and importing it into the Fire Family Plus 5.0 application.

Important! Important: You must be using Version 5.0 or above for the step below to work:

Visit the FireFamilyPlus Software download page to download the Fire Family Plus.

  1. Open Fire Family Plus, go to File in the top left, select New to create, name, and save a new Fire Family Plus (.mdb) file.
  2. Go to the Data tab and select Import to import your FW13 file.

    start a new session from 'file' as described here in text.

  3. Click FW9/FW13 Files and select your file from your local machine. If you are asked whether or not to let FF+ overwrite existing records, choose “No” and continue.

    select the 'FW9/FW13 Files' type to import.

  4. When your data import is complete, close the Notification and Import boxes.

    click the 'close' buttons that appear when the file import is complete.

  5. Select your newly imported data from the SIG/Station drop-down menu.
  6. Use the date fields to select up to 31 days of data.
  7. Make sure Analysis Period Length (Days) is set to “1”.

    follow the steps outlined here in text to select up to 31 days of weather data and a analysis period length of 1 day.

  8. Click the Weather tab from the top menu, hover over Hourly Data Analysis and click Flammap/FARSITE Exports.

    use the weather tab as described in text to set up the export process.

  9. In the dialogue box that appears, select Flammap/FARSITE Stream (.wxs) as the file you want to create and use the Ten minute avg option for wind.
  10. Click the location and select where you want to save your new file, and give it a name.
  11. Click “OK."

    Select the  'Flammap/FARSITE Stream (.wxs)' file type, use 'ten minute avg' winds, and click 'ok'.

  12. Once your file is created you may close Fire Family Plus. The newly created .wxs is available on your local machine for use in IFTDSS.

    The wxs file will now be available for upload into IFTDSS.