Quantitative Wildfire Risk Assessment (QWRA) Tutorial

Tip: To run a QWRA you must have run LBP, Mapped Values, and Exposure Analysis. See the QWRA overview topic for details on this workflow.

Running a Quantitative Wildfire Risk Assessment (QWRA) creates a map of potential benefits and threats from fire represented by Conditional weighted Net Value Change (NVC) and Expected weighted NVC for each pixel on the landscape. You may populate the Response Function and Relative Important inputs directly in the IFTDSS interface, as described below, or populate and upload a .CSV file for those inputs (described in the .CSV upload topic).

  1. Go to the QWRA interface from the IFTDSS Planning Cycle by clicking on Strategic Planning and selecting Risk Assessment.

    Risk Assessment is under the Strategic Planning stage of the IFTDSS Planning Cycle.

  2. Select an Exposure Analysis output from the drop-down menu. If you need to create one, you may navigate to that part of IFTDSS by clicking the Exposure Analysis Exposure Analysis button to the right of the drop-down menu.

    The QWRA inputs page showing headers for input fields including Exposure Analysis, Response Functions, Relative Importance, and Naming.

  3. Define response functions (RFs). If you used National HVRA Set National HVRAs when creating your HVRA-Set, the response functions are pre-populated. Any response functions, including pre-populated ones, can be edited in this step. Response functions range from –100 (indicating strong loss) to 100 (indicating strong benefit) for each of these six modeled flame length categories.

    Tip: An alternative to filling in response functions and relative importance is uploading these as a .CSV. Instructions for populating the .CSV and importing it are outlined here.

    Response functions populated in the Response Function input fields.

  4. Assign relative importance (RI) to each Primary HVRA and Sub HVRA. Follow these guidelines to populate RIs:

    • Primary HVRAs: At least one Primary category must be assigned a value of 100; more than one may be assigned 100. A value of 100 represents the highest priority resource.
    • Sub-HVRAs: At least one Sub-HVRA within each Primary Category must be assigned a value of 100; more than one may be assigned 100. A value of 100 represents the highest priority within that category.
    • Once populated, you may review your selections using the dynamic pie chart which calculates over-all importance percentages for both Primary HVRAs (inner circle) and associated Sub-HVRAs (outer circle). Hovering over a portion of the circle will pop up with an overall importance value taking into account the RF, RI, and Relative extent (acreage) of Sub-HVRAs. More details on this calculation may be found in the Relative Importance topic.

    Relative Importance input fields with pie chart visible next to them on the left.

    5. Tip: Pie charts only show up in full screen mode. If you are viewing in split screen mode, use the full screen full screen button switch back to full screen mode.

  5. Name your output and click Run, or Save to return to run it later.

    The "name" field at the bottom of the QWRA page.

    Important! Remember as each model input (RF, RI, etc.) is completed a green checkmark displays to the left of the header.

    Model input header with a green checkmark visible to the left, indicating that input has been populated.

    If you are unable to use the Save or Run buttons, check your inputs to ensure that all have been populated and a green checkmark is visible for each.

    Important! A maximum of three Quantitative Wildfire Risk Assessments may be submitted at any given time. If you see a pop-up notifying you that this number has been exceeded, please save any inputs you’ve entered and complete your task when one of the other analyses has completed.

  6. Once you click Run you will be asked to confirm your inputs. Clicking Yes redirects you to the My Workspace folder where your run is stored. In My Workspace, there are options to view the run in Map Studio, generate a summary report, or download the QWRA to your local computer.

    Confirm Action pop up box requesting you approve submission of the Risk Assessment workflow

    Important! The Update button replaces the Save button if you begin to edit a saved QWRA. Update saves your new changes and overwrites your previous inputs.